BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//CAD MicroSolutions Inc. - ECPv6.15.15//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:CAD MicroSolutions Inc.
X-ORIGINAL-URL:https://www.cadmicro.com
X-WR-CALDESC:Events for CAD MicroSolutions Inc.
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Toronto
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240618T090000
DTEND;TZID=America/Toronto:20240620T170000
DTSTAMP:20260406T193238
CREATED:20240207T152701Z
LAST-MODIFIED:20240207T152843Z
UID:56198-1718701200-1718902800@www.cadmicro.com
SUMMARY:SOLIDWORKS Simulation Essentials – Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-simulation-essentials-online-8/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Sim-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240617T090000
DTEND;TZID=America/Toronto:20240621T170000
DTSTAMP:20260406T193238
CREATED:20240221T213048Z
LAST-MODIFIED:20240221T213403Z
UID:57278-1718614800-1718989200@www.cadmicro.com
SUMMARY:SOLIDWORKS Parts\, Assemblies & Drawings – Calgary
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-parts-assemblies-drawings-calgary-2/
LOCATION:CAD Micro – Calgary\, Bow Valley Square 4\, 250 - 6th Ave SW\, Suite No. 1660\, Calgary\, Alberta\, T2P 3H7\, Canada
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SW-CAD-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240614T110000
DTEND;TZID=America/Toronto:20240614T120000
DTSTAMP:20260406T193238
CREATED:20240529T164054Z
LAST-MODIFIED:20240529T165416Z
UID:62338-1718362800-1718366400@www.cadmicro.com
SUMMARY:Helicopter Digitization: A Live Walkthrough
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/helicopter-digitization-a-live-walkthrough/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Helicopter.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240612T140000
DTEND;TZID=America/Toronto:20240612T143000
DTSTAMP:20260406T193238
CREATED:20240527T190504Z
LAST-MODIFIED:20240611T133320Z
UID:62198-1718200800-1718202600@www.cadmicro.com
SUMMARY:Advanced Techniques for Efficient Methods in Casting Industry
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/advanced-techniques-for-efficient-methods-in-casting-industry/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Casting-Webinar-June-12-Website.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240612T110000
DTEND;TZID=America/Toronto:20240612T113000
DTSTAMP:20260406T193238
CREATED:20240527T161631Z
LAST-MODIFIED:20240527T162059Z
UID:62176-1718190000-1718191800@www.cadmicro.com
SUMMARY:Advanced Techniques for Mastering Plastic Inspection
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/advanced-techniques-for-mastering-plastic-inspection/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Plastics-Webinar-June-6-Website.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240606T100000
DTEND;TZID=America/Toronto:20240606T110000
DTSTAMP:20260406T193238
CREATED:20240516T174340Z
LAST-MODIFIED:20240516T174921Z
UID:62001-1717668000-1717671600@www.cadmicro.com
SUMMARY:Débloquez le succès après-vente avec Components Engine - Catalogues de pièces détachées interactifs en un instant (Français)
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/debloquez-le-succes-apres-vente-avec-components-engine-catalogues-de-pieces-detachees-interactifs-en-un-instant/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Components-Engine.jpg
ORGANIZER;CN="PBI":MAILTO:info@pbicadcam.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240605T120000
DTEND;TZID=America/Toronto:20240605T160000
DTSTAMP:20260406T193238
CREATED:20240129T144018Z
LAST-MODIFIED:20240523T165950Z
UID:55629-1717588800-1717603200@www.cadmicro.com
SUMMARY:Advanced Manufacturing Open House
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/advanced-manufacturing-open-house-9/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:In Person Event
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240605T110000
DTEND;TZID=America/Toronto:20240605T120000
DTSTAMP:20260406T193238
CREATED:20240513T171643Z
LAST-MODIFIED:20240513T172122Z
UID:61672-1717585200-1717588800@www.cadmicro.com
SUMMARY:Unlocking After Sales Success with Components Engine - Interactive Spare Parts Catalogs in a Flash
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/unlocking-after-sales-success-with-components-engine-interactive-spare-parts-catalogs-in-a-flash/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Components-Engine.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240604T090000
DTEND;TZID=America/Toronto:20240605T170000
DTSTAMP:20260406T193238
CREATED:20240207T151459Z
LAST-MODIFIED:20240207T151704Z
UID:56170-1717491600-1717606800@www.cadmicro.com
SUMMARY:SOLIDWORKS Assembly Modeling Training – Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-assembly-modeling-training-online-4/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SW-CAD-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240603T090000
DTEND;TZID=America/Toronto:20240607T170000
DTSTAMP:20260406T193238
CREATED:20240513T182221Z
LAST-MODIFIED:20240513T182518Z
UID:61698-1717405200-1717779600@www.cadmicro.com
SUMMARY:SOLIDWORKS Parts\, Assemblies & Drawings – Toronto
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-parts-assemblies-drawings-toronto-6/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SW-CAD-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240530T160000
DTEND;TZID=America/Toronto:20240530T170000
DTSTAMP:20260406T193238
CREATED:20240524T185326Z
LAST-MODIFIED:20240524T190623Z
UID:62124-1717084800-1717088400@www.cadmicro.com
SUMMARY:How to Use 3D Printing in the Classroom\, Library\, & Lab
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/how-to-use-3d-printing-in-the-classroom-library-lab/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/classroomlibraryandlabwebinar-website.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240529T140000
DTEND;TZID=America/Toronto:20240529T150000
DTSTAMP:20260406T193238
CREATED:20240523T160443Z
LAST-MODIFIED:20240523T160811Z
UID:62087-1716991200-1716994800@www.cadmicro.com
SUMMARY:Structural and Computational Fluid Dynamics Simulation for Hardware Startups
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/structural-and-computational-fluid-dynamics-simulation-for-hardware-startups/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Structural-and-CFD-Sim-Webinar-Website.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240528T090000
DTEND;TZID=America/Toronto:20240529T170000
DTSTAMP:20260406T193238
CREATED:20240207T151023Z
LAST-MODIFIED:20240207T151855Z
UID:56162-1716886800-1717002000@www.cadmicro.com
SUMMARY:SOLIDWORKS Simulation Professional Training – Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-simulation-professional-training-online-2/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Sim-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240528T090000
DTEND;TZID=America/Toronto:20240528T160000
DTSTAMP:20260406T193238
CREATED:20240129T205936Z
LAST-MODIFIED:20240129T210701Z
UID:55713-1716886800-1716912000@www.cadmicro.com
SUMMARY:DEX Expo - Saskatoon
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/dex-expo-saskatoon/
LOCATION:Prairieland Park Trade and Convention Centre\, 503 Ruth Street West\, Saskatoon\, Saskatchewan\, S7K4E4\, Canada
CATEGORIES:Trade Show
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/DEX-Show-Website-banner-Image.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240523T110000
DTEND;TZID=America/Toronto:20240523T120000
DTSTAMP:20260406T193238
CREATED:20240514T140141Z
LAST-MODIFIED:20240514T140857Z
UID:61728-1716462000-1716465600@www.cadmicro.com
SUMMARY:SOLIDWORKS CAM and CAMWorks – Getting Started with the TechDB
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-cam-and-camworks-getting-started-with-the-techdb-5/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SW-CAM-CAMWorks-Webinar-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240522T100000
DTEND;TZID=America/Toronto:20240522T110000
DTSTAMP:20260406T193238
CREATED:20240513T174809Z
LAST-MODIFIED:20240513T175529Z
UID:61683-1716372000-1716375600@www.cadmicro.com
SUMMARY:From Low to High Temp Filaments: How to Choose the Perfect Material for any Application
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/from-low-to-high-temp-filaments-how-to-choose-the-perfect-material-for-any-application/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/BR-Filaments-Webinar.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240521T080000
DTEND;TZID=America/Toronto:20240523T120000
DTSTAMP:20260406T193238
CREATED:20240207T150240Z
LAST-MODIFIED:20240410T133121Z
UID:56144-1716278400-1716465600@www.cadmicro.com
SUMMARY:CAMWorks Essentials 3 Axis Training – Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/camworks-essentials-3-axis-training-online-2/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/CAM-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240521T090000
DTEND;TZID=America/Toronto:20240522T170000
DTSTAMP:20260406T193238
CREATED:20240207T150706Z
LAST-MODIFIED:20240207T151832Z
UID:56152-1716282000-1716397200@www.cadmicro.com
SUMMARY:SOLIDWORKS Simulation Dynamics Training – Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-simulation-dynamics-training-online-2/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Sim-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240516T100000
DTEND;TZID=America/Toronto:20240516T160000
DTSTAMP:20260406T193238
CREATED:20240305T181441Z
LAST-MODIFIED:20240508T203837Z
UID:58113-1715853600-1715875200@www.cadmicro.com
SUMMARY:Simulation Demo Day
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/simulation-demo-day-3/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:In Person Event
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Adv-Sim-Summit-Website-Image.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240515T120000
DTEND;TZID=America/Toronto:20240515T160000
DTSTAMP:20260406T193238
CREATED:20240129T143730Z
LAST-MODIFIED:20240425T185318Z
UID:55622-1715774400-1715788800@www.cadmicro.com
SUMMARY:Additive Manufacturing Open House
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/additive-manufacturing-open-house-4/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:In Person Event
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/3DP-1.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240514T090000
DTEND;TZID=America/Toronto:20240516T170000
DTSTAMP:20260406T193238
CREATED:20240209T151921Z
LAST-MODIFIED:20240209T152725Z
UID:56289-1715677200-1715878800@www.cadmicro.com
SUMMARY:SOLIDWORKS PCB Essentials Training - Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-pcb-essentials-training-online/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Electrical-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240514T090000
DTEND;TZID=America/Toronto:20240516T170000
DTSTAMP:20260406T193238
CREATED:20240207T145859Z
LAST-MODIFIED:20240207T150200Z
UID:56135-1715677200-1715878800@www.cadmicro.com
SUMMARY:SOLIDWORKS Advanced Part Modeling – Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-advanced-part-modeling-online-6/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SW-CAD-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240513T090000
DTEND;TZID=America/Toronto:20240517T170000
DTSTAMP:20260406T193238
CREATED:20240422T195629Z
LAST-MODIFIED:20240422T200057Z
UID:60575-1715590800-1715965200@www.cadmicro.com
SUMMARY:SOLIDWORKS Parts\, Assemblies & Drawings – Toronto
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-parts-assemblies-drawings-toronto-4/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SW-CAD-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240513T090000
DTEND;TZID=America/Toronto:20240515T170000
DTSTAMP:20260406T193238
CREATED:20240319T175859Z
LAST-MODIFIED:20240502T192032Z
UID:59044-1715590800-1715792400@www.cadmicro.com
SUMMARY:SOLIDWORKS Simulation Essentials – Online
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-simulation-essentials-online-9/
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Sim-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240509T100000
DTEND;TZID=America/Toronto:20240509T160000
DTSTAMP:20260406T193238
CREATED:20240227T181942Z
LAST-MODIFIED:20240227T182155Z
UID:57540-1715248800-1715270400@www.cadmicro.com
SUMMARY:BigRep Demo Day
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/bigrep-demo-day-2/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:In Person Event
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/BR-webinar-1.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240508T090000
DTEND;TZID=America/Toronto:20240508T120000
DTSTAMP:20260406T193238
CREATED:20240305T165122Z
LAST-MODIFIED:20240425T185642Z
UID:58064-1715158800-1715169600@www.cadmicro.com
SUMMARY:Simulation Hands-On Test Drive
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/simulation-hands-on-test-drive-3/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:In Person Event
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/Sim-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240506T090000
DTEND;TZID=America/Toronto:20240510T170000
DTSTAMP:20260406T193238
CREATED:20240207T145534Z
LAST-MODIFIED:20240207T145752Z
UID:56128-1714986000-1715360400@www.cadmicro.com
SUMMARY:SOLIDWORKS Parts\, Assemblies & Drawings – Cambridge
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/solidworks-parts-assemblies-drawings-cambridge-2/
LOCATION:CAD Micro – Cambridge\, 225 Pinebush Road\, Unit 102\, Cambridge\, Ontario\, N1T1B9\, Canada
CATEGORIES:Training
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SW-CAD-Training-Thumbnail.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240502T130000
DTEND;TZID=America/Toronto:20240502T140000
DTSTAMP:20260406T193238
CREATED:20240327T142228Z
LAST-MODIFIED:20240417T191049Z
UID:59550-1714654800-1714658400@www.cadmicro.com
SUMMARY:Innovate with CAD Micro: ACIDO’s Tools and Tech Thursday
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/innovate-with-cad-micro-acidos-tools-and-tech-thursday/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/ACIDO-Event-Website-Image.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240502T110000
DTEND;TZID=America/Toronto:20240502T120000
DTSTAMP:20260406T193238
CREATED:20240425T202254Z
LAST-MODIFIED:20240425T204626Z
UID:61006-1714647600-1714651200@www.cadmicro.com
SUMMARY:Live Demo of the UltiMaker Factor 4
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/live-demo-of-the-ultimaker-factor-4/
CATEGORIES:Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SDB-00082-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20240501T120000
DTEND;TZID=America/Toronto:20240501T160000
DTSTAMP:20260406T193238
CREATED:20240129T143428Z
LAST-MODIFIED:20240429T151823Z
UID:55615-1714564800-1714579200@www.cadmicro.com
SUMMARY:Advanced Manufacturing Open House
DESCRIPTION:Events				\n				\n				\n				\n							\n			\n						\n		\n						\n				\n				\n				\n					February 11 - 12 | 9am - 5pm ET				\n				\n					\n		\n					\n		\n				\n						\n					\n			\n						\n				\n									SOLIDWORKS Visualize Training – 2 DaysCourse Description This course will provide an in-depth coverage of creating photorealistic renderings. With the use of case studies\, you will learn the necessary commands and workflows needed to set-up\, manage\, and complete a rendering. Prerequisites Experience with the Windows™ operating system and some experience with a conventional camera. Course Components: Create high quality renderingsCreate high quality videosCreate VR outputs  To enquire about this course\, please fill the form and we will contact you shortly. *Course dates subject to change 								\n				\n					\n		\n				\n			\n						\n				\n					Inquire Now				\n				\n				\n				\n									Complete the form below and a member of our team will contact you shortly to confirm your interest.
URL:https://www.cadmicro.com/event/advanced-manufacturing-open-house-7/
LOCATION:CAD Micro\, 30 International Blvd\, Unit 1\, Toronto\, Ontario\, M9W 1A2\, Canada
CATEGORIES:In Person Event
ATTACH;FMTTYPE=image/jpeg:https://www.cadmicro.com/wp-content/uploads/SmartMTX-Event-Page-Image-1.jpg
ORGANIZER;CN="CAD Micro":MAILTO:contact@cadmicro.com
END:VEVENT
END:VCALENDAR