POLYSHOT SURFACING WITH DYEMANSION POWERSHOT S
TO ACHIEVE AN END-USE PART FINISH
Our automated mechanical PolyShot Surfacing (PSS) is the most efficient process on the market to achieve the best end-use part finish. It does not remove any material and works perfectly for hard plastics like PA12 or PA11 across all geometries. With a cycle time of only 10 minutes and a capacity of a mid sized build job per run, the Powershot S works very cost-effectively. Using our automated PolyShot Surfacing, instead of time-consuming abrasive methods like tumbling, increases your productivity and part quality significantly.
WITH PLEASANT HAPTICS AND IMPROVED PROPERTIES
PSS delivers a unique matt-glossy look and pleasant haptics for the majority of 3D printed end-use applications. Launched in 2016, it set a totally new quality standard and is well-established in various industries already: From perfect fit eyewear to personalized car interiors. Especially in the consumer sector and for many technical applications the improved scratch resistance and soft haptics lead to higher wearing comfort and an extended product life cycle.
We believe PolyShot Surfacing to be the main basis for maximizing coloring results. Shooting beads accelerated with compressed air equalizes the peaks and lows of the surface, achieving a more homogenous part quality. The pores are closed during the process and the result is a significantly improved, uniform surface. This is particularly important for further processing steps, such as chemical dyeing techniques in a water bath. The dyes are taken up much more homogenous from the base material.
INSIDE THE POWERSHOT S
DyeMansion’s Powershot S offers the most efficient process on the market to achieve the best end-use parts. With a cycle time of only 10 minutes for a full size HP Jet Fusion 4200/5200 build, and by leveraging their automated mechanical Polyshot Surfacing (PSS) technology as opposed to a more time-consuming and abrasive technology like tumbling, parts finished with the Powershot S have unparalleled quality.Download Datasheet
DISCOVER THE POWERSHOT S ALL AROUND
Sample Surfacing Results
CAPACITY PER RUN: MID SIZED BUILD JOB (E.G. 3/4 OF EOS P396 OR FULL HP JET FUSION 4200/5200)
SPECIAL BLASTING NOZZLE SET-UP & AUTOMATED BLASTING MEDIA CLEANING
The combination of blasting and ionizing nozzles are optimized to achieve this powder-free process. A high-performance, adjustable cyclone separates the blasting media from other particles and keeps the cabinet clean.
DYEMANSION PRINT-TO-PRODUCT WORKFLOW
Our technology starts where the industrial 3D printer stops – from 3D printed raw part to high-value finished product in three hours. The combined three-step DyeMansion Print-to-Product workflow enables scaling from prototyping or small series to high-volume manufacturing and thus closes the manufacturing gap.
|Cycle time||Variable, typically 5 to 15 minutes|
|Capacity per run||Mid sized build job (e.g. 3/4 of EOS P396 or full HP Jet Fusion 4200/5200)|
|System (L x W x H)||1665mm x 1300mm x 2100mm | 65.6inch x 51.2inch x 82.7inch|
|Recommended space for operations (L x W x H)||2465mm x 2915mm x 2300mm | 97.0inch x 114.8inch x 90.6inch|
|System||520kg | 1146lb
|Requirements||400V, 50Hz, 16A or 208V, 60Hz, 20A|
|Consumption||Minimum: 1.8m3/min at 5bar |
64cfm at 73psi
Maximum: 2.5m3/min at 7bar | 88cfm at 101psi