DyeMansion Powershot C

EASY AND EFFICIENT PART CLEANING

CLEANING WITH DYEMANSION POWERSHOT C

Using the DyeMansion Powershot C, up to 75% of an EOS P396 or full HP Jet Fusion 4200/5200 job can be cleaned in only ten minutes. Time needed for cleaning and personnel costs can be reduced in a significant way and therefore improve the efficiency. A configurable timer allows a constant batch processing and parts can be processed much faster.
Compared to manual blasting cabins the DyeMansion Powershot C is equipped with a rotating basket and is manufactured from stainless steel. Two simultaneously working blasting nozzles, that are positioned perpendicular to the rotating basket and the contained parts, remove the powder in an efficient way. A fixed distance between the parts and the blasting nozzles ensures reproducible results without damaging the parts during the process.
By investing in automated part cleaning with the DyeMansion Powershot C, up to four manual blasting systems can be replaced. In addition to the resulting lower operating costs, investment costs are saved to the extent that the investment and maintenance costs only affect one system.
before
after

INSIDE THE POWERSHOT C

The DyeMansion Powershot C enables you to clean a full HP Jet Fusion 4200 or 5200 print job in only 10 minutes, allowing you to print and process more parts in a fraction of the time and significantly reduce the personnel costs associated with manual cleaning of your parts.

Download Datasheet
Cleaning I Inside the Powershot C

DISCOVER THE POWERSHOT C ALL AROUND


CAPACITY PER RUN: MID SIZED BUILD JOB (E.G. 3/4 OF EOS P396 OR FULL HP JET FUSION 4200/5200)

SPECIAL NOZZLE SET-UP & AUTOMATED BLASTING MEDIA CLEANING

The combination of blasting and ionizing nozzles achieve powder-free parts in just a few minutes. The adjustable high performance cyclone separates the excess powder from blasting media and enables consistent blasting results.

korb_psc_en

DYEMANSION PRINT-TO-PRODUCT WORKFLOW

Our technology starts where the industrial 3D printer stops – from 3D printed raw part to high-value finished product in three hours. The combined three-step DyeMansion Print-to-Product workflow enables scaling from prototyping or small series to high-volume manufacturing and thus closes the manufacturing gap.

1
CLEANING
POWERSHOT C
Learn More
2
POLYSHOT SURFACING | PSS
POWERSHOT S
Learn More
2
VAPORFUSE SURFACING | VFS
POWERFUSE S
Learn More
3
DEEPDYE COLORING | DDC
DM60
Learn More

TECHNICAL DATA

Cycle time Variable, typically 3 to 10 minutes
Capacity per run Mid sized build job (e.g. 3/4 of EOS P396 or full HP Jet Fusion 4200/5200)
System (L x W x H) 1665mm x 1300mm x 2030mm | 65.6inch x 51.2inch x 79.9inch
Recommended space for operations (L x W x H) 2465mm x 2915mm x 2300mm | 97.0inch x 114.8inch x 90.6inch
System 520kg  | 1146lb
Supply 1kW
Requirements 400V, 50Hz, 16A or 208V, 60Hz, 20A
Consumption

Minimum: 1.4m3/min at 2.2bar | 50cfm at 32psi

Maximum: 1.8m3/min at 5bar | 64cfm at 73psi

Sound level <85dB(A)
CE 2006/42/EG