GOM 3D METROLOGY / 3D SCANNING TRAINING

Certified instructor-led training courses follow a global standardized approach, providing participants with the skills and knowledge to successfully operate GOM 3D metrology and 3D scanning solutions. Training is offered in class at one of our training facilities or on-site at your company’s premises.

3D Metrology Training Courses

Duration: 3 days
Certificate: ATOS Professional System Basic Training
System:
  • ATOS sensor
  • ATOS Professional software
Prerequisites:
  • Basic knowledge of coordinate measuring technology
  • Basic computer skills

During this three-day course, participants will learn the fundamental strategies for working with an ATOS sensor and ATOS Professional software, and includes a module on acquisition and a module on inspection.

The acquisition module educates participants on how to digitize a measuring object with an ATOS sensor based on different measuring strategies, by carrying out practical exercises with the ATOS system and creating a 3D model of an exemplary measuring object.

The inspection module teaches participants the basics required for evaluating digitized measuring objects. Using their 3D model created during the first module, participants will perform inspection tasks of varying complexity and analyze the results, including distances, diameters and angles.

Course content:
  • ATOS – introduction to the sensor and software
  • Digitization of measuring objects
  • Simple inspection and parametric inspection
  • Inspection planning on nominal data – working with project templates
  • Creation of reports
  • Sensor handling and measurement strategies
  • Set up and calibration of hardware
  • Changing the measuring volume of the ATOS sensor
  • Preparing measuring objects with reference points
  • Measuring without reference points
  • Processing of measured data
  • Alignment methods
  • Working with tables and diagrams
  • Measuring with an automated rotation table
  • Creation of trend analyses
  • Creation of user-defined inspections
  • Exchange of data
*This is a separately bookable portion of the complete ATOS Professional System Basic Training (3 day course)

Duration: 2 days
Certificate: Inspection Basic Training – 3D Metrology
System:
  • ATOS Professional or GOM Inspect Professional software
Prerequisites:
  • Basic knowledge of coordinate measuring technology
  • Basic computer skills

During this two-day course, participants will learn how to inspect 3D measuring data that was digitized with an ATOS system on GOM software. The evaluation can either be performed in GOM Inspect Professional software or in ATOS Professional software.

Participants perform inspection tasks of varying complexity and analyze the results, including distances, diameters and angles.

Course Content:
  • Introduction to the software
  • Simple inspection and parametric inspection
  • Inspection planning – working with project templates
  • Creation of reports
  • Alignment methods
  • Working with tables and diagrams
  • Measuring with an automated rotation table
  • Creation of user-defined inspections
  • Exchange of data

Advanced training courses with GOM provide in-depth learning on specific topics and applications. Participants can gain a deeper understanding of the GOM software and learn advanced functions for their applications. Prerequisites for advanced courses include the basic knowledge acquired in the basic training courses.

Provided by GOM experts, advanced training courses include:

Automation VMR Training Course (2 days)

GD&T – With GOM to GPS (2 days)

Inquire on GOM ADvanced Training Courses

To inquire about GOM Advanced Training Courses, please fill out the form below: